Thickener Hydroxyethyl Cellulose HEC Emulsion Paint Grade HEC

• Customization: Available
• Type: Concrete Grout Mortar Tile Adhesive Reinforcement
• HEC: Hydroxyethyl Cellulose
• Model NO.: Emulsion Paint Grade ydroxyethyl Cellulose HEC
• Hydroxyethyl Cellulose: HEC
• Thickener Hydroxyethyl Cellulose HEC: Thickener Hydroxyethyl Cellulose HEC
• After-Sales Service: HEC
• Transport Package: Woven Polypropylene Bag
• Specification: 5-60, 000 mpa. s
• Trademark: HEC Oil Drilling Building Painting Oil Drilling
• Origin: China
• Production Capacity: 1, 50, 000 Mt/Year

Product Description

Thickener Hydroxyethyl Cellulose HEC Emulsion Paint Grade
High Viscosity Emulsion Paint Thickener HEC for Coating Detergent Cosmetic HEC HPMC CMC VAE HPS Construction Material Additive


HEC(Hydroxyethyl Cellulose)
KELAIDE brand hydroxyethyl cellulose (HEC) is a natural polymer material cellulose as raw material. Non-ionic cellulose ether made by a series of chemical processing. It is an odorless, tasteless and non-toxic white to off-white powder or granule. It can be dissolved in cold water to form a transparent, viscous solution. It has thickening. Adhesion, dispersion, emulsification, film formation, suspension, adsorption, surface activity, salt resistance, moisture retention and protective colloid. KELAIDE brand hydroxyethyl cellulose (HEC) can be used in construction materials, coating industry, petrochemical industry, synthetic resin, ceramic industry, medicine, food, textile, agriculture, cosmetics, tobacco, ink, papermaking and other industries.

Technical Data sheet

Product technical requirements:Q/09FRT006-2001
Items	Index
Molar substitution(MS)	1.8-2.5
Moisture(%)	≤6
Water insoluble(%)	≤0.5
PH value	6.0-8.5
Ash(%)	≤5
Viscosity(mpa.s) 2%,25 aqueous solution	5-60,000

Viscosity Specification:

Specification	Range(mpa.s)
6,000	4,000-7,000
10,000	8,000-12,000
15,000	13,000-17,000
20,000	18,000-22,000
30,000	26,000-34,000
40,000	36,000-44,000
50,000	45,000-54,000
60,000	55,000-64,000

Note:The model of HEC is represented by RT-6000, 6000 means nominal viscosity. The surface treated model is RT-6000S.
Physical and chemical properties:
white or light yellow powder;odorless, tasteless and easy to flow.
Softening temperature: 135-140ºC
Surface density: 0.35-0.61 g/ml
Decomposition temperature: 205-210 ºC
Slower burning speed
Balanced moisture content: 23 ºC
6% at 50% rh; 29% at 84% rh
It is soluble in both cold and hot water and is generally insoluble in most organic solvents. The viscosity change is small within the range of pH 2-12, but the viscosity decreases beyond this range. The surface-treated HEC disperses and does not agglomerate in cold water, but the dissolution rate is slow, and it usually takes about 30 minutes. It can be dissolved quickly by heating or lowering the pH to 8-12.

Application:
1. For water-based latex coatings: It can significantly improve thickening and leveling performance.
2. For Oil drilling: It can improve mud carrying capacity during drilling, and prevent a large amount of water from entering the oil layer from the mud, and stabilize the oil layer production capacity.
3. For building construction and building materials: HEC is an effective thickener and binder for cement slurry and mortar. It can improve the fluidity and construction performance of the mortar, and prolong the water evaporation time, and increase the initial cracks of the concrete. It used for painting gypsum, bonding gypsum, gypsum putty can significantly improve its water retention and bonding strength.
4. For toothpaste: HEC can guarantee the stability of toothpaste paste due to its strong salt resistance and acid resistance. In addition, the toothpaste is not easy to dry due to its high water retention and emulsifying ability.
5. For water-based ink, HEC can make the ink dry quickly and not penetrate.
6.HEC is widely used in textile printing and dyeing, papermaking, and daily chemicals.

Steps and methods of making solution:
1. Add a prescribed amount of clean water to the container.
2. If hydroxyethyl cellulose is stirred at low speed, stir until all materials are completely wet.
3. Add other ingredients of the formula and stir well.
4. The surface-treated HEC will form a viscosity in about 30 minutes after dispersing it in water. Or after the material is completely wet, add alkali or ammonia water to adjust the pH between 8 and 10 to form a viscosity.